Catelog Title
Current Catalog
Weekly Special Title
Follow us on Facebook!
Product Detail
Top Left Corner  Top Right Corner
Bottom Left Corner  Bottom Right corner
SpecChem 5 Gallon SpecStrip Plus Premium Reactive Form Release Agent
SPECSTRIP PLUS is a chemically active release agent specially engineered to positively prevent bonding of the concrete to wood, steel, and aluminum forms.

SPECSTRIP PLUS contains no diesel, kerosene, waxes or silicones.

Improves release of formwork
Reduces concrete buildup on formwork and liners
Reduces cleaning of formwork
Protects formwork against rust
Leaves no residue, stain or discoloration
Is pleasant smelling
Compatible with elastomeric and urethane form liners
Coverage: Ready to use. Do not dilute. Form surfaces should be clean of dirt, rust, scale and concrete build up prior to application. Spray application of SPECSTRIP PLUS is recommended with coverage as follows:
Steel, Plastic, Fiberglass 2000 sq ft/gal
Conditioned Aluminum 2000 sq ft/gal
HDO Plywood 2000 sq ft/gal
MDO Plywood 1500 sq ft/gal
Dimensional Lumber 1000 sq ft/gal
BB Grade Plywood 1000 sq ft/gal

Actual application rates depend on the porosity of form surface.

SPECSTRIP PLUS should be spray applied using an atomizing or misting spray tip so that application may be in thin uniform films to maximize product performance and economy. Over-application will not produce better results and may cause dusting.

Excess material or puddles should be removed with a squeegee and absorbent rags.

When properly applied, SPECSTRIP PLUS will not leave any residue or stain on the concrete, producing a smooth, architectural concrete surface ready for subsequent coatings. Coating manufacturer’s recommendations for surface preparations must be followed.

Sprays easily in cold temperatures. Proper application substantially reduces concrete surfaces voids and extends the life of wood forms.
SPECSTRIP PLUS meets V.O.C. emission requirements for form releases (EPA limit < 450 g/L).
  • V.O.C. content <250 g/L
  • Corps of Engineers CEGS-03300, Section 10.8 Form Coating
  • Navy Dock and Piers 56359
SPECSTRIP PLUS should not be used as a bond breaker in tilt up construction.

Click here for Tech Data Sheet

Click here for MSDS Sheet
Model : SSPLUS5
To purchase this item please contact NuWay at:
Related Products